Diagnostic Test

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION

CONSULT CONFIGURATION:

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

GO TO STEP 2 .

REPLACE BCM

Replace BCM. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 3 .

WRITING VEHICLE SPECIFICATION

CONSULT CONFIGURATION:

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to WORK PROCEDURE .

GO TO STEP 4 .

INITIALIZE BCM (NATS) (IF EQUIPPED)

Perform BCM initialization (NATS) using CONSULT.

WORK END