FixVault
Home › Infiniti › 2015 › QX80 Base, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › DTC/Circuit Diagnosis › DTC B2605: Shift Position › DTC Logic › DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B2605 PNP/CLUTCH SW When ignition switch is ON, P/N position signal input from TCM and P/N position signal (CAN) input from IPDM E/R do not match.
  • Harness or connectors

    (CAN communication line is open or shorted.)

  • Harness or connectors

    (TCM circuit is open or shorted.)

  • IPDM E/R
  • BCM
About FixVault