Component Function Check

1. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" using CONSULT.
2. Check mirror sensor (driver side) signal under the following condition.

   Monitor item	Condition	Value
   MIR/SEN LH U-D	Door mirror (driver side)	Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley)
   MIR/SEN LH R-L		Change between 0.6 [V] (close to left edge) 3.4 [V] (close to right edge)

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .