Component Function Check

1. Select "MEMORY SW 1", "MEMORY SW 2", "SET SW" in "Data monitor" mode using CONSULT.
2. Check seat memory switch signal under the following conditions.

   Monitor item	Condition		Status
   MEMORY SW 1	Memory switch 1	Push	ON
   		Release	OFF
   MEMORY SW 2	Memory switch 2	Push	ON
   		Release	OFF
   SET SW	Set switch	Push	ON
   		Release	OFF

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .