Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the glove box. Refer to Removal and Installation .
- Remove the instrument lower panel. Refer to Removal and Installation .
- Disconnect steering force control module harness connectors.
- Disconnect ECM harness connectors.
- Remove the nuts
of steering force control module
mounting bracket.
- Remove the steering force control module.CAUTION: When replacing control module, replace the following control modules as a set.
- Steering force control module
- Steering angle main control module
- Steering angle sub control module