FixVault
Home › Infiniti › 2017 › QX30 Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (Removal And Installation) › Unit Disassembly And Assembly › Input Shaft › Disassembly And Assembly › Assembly

Disassembly And Assembly: Assembly

  1. Using sleeve [SST: KV325H0700 (TechMate No. -) (DAIMLER tool No. 168 589 01 14 00)] install the 3rd gear from drive shaft.
  2. Using suitable tool install the sensor rotor from drive shaft.
    CAUTION:

    Never reuse sensor rotor.

  3. Install 5th and 7th gear from drive shaft.
  4. Install needle bearings.
About FixVault