FixVault
Home › Infiniti › 2017 › QX70 RWD › Repair and Diagnosis › Electrical › Body Electrical › Power Control System (Power Distribution System) (DTC/Circuit Diagnosis) › DTC/Circuit Diagnosis › Push-Button Ignition Switch › Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. Select "PUSH SW" in "Data Monitor" mode with CONSULT.
    2. Check the Push-Button Ignition Switch signal under the following condition.
    Test Item Condition Status
    PUSH SW Push-Button Ignition Switch is pressed ON
    Push-Button Ignition Switch is not pressed OFF

    Is the indication normal?

    YES 

    INSPECTION END

    NO 

    Go to DIAGNOSIS PROCEDURE .

About FixVault