FixVault
Home › Infiniti › 2017 › QX70 RWD › Repair and Diagnosis › External Pages › Different car › Section 261 (Body Control System) › Removal And Installation › BCM (Body Control Module) › Removal And Installation › Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dash side finisher (passenger side). Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  2. Remove bolt and nut.
  3. Remove BCM and disconnect the connector.
About FixVault