Component Function Check
WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPERATION OF METER BUZZER
- Select "BUZZER" of "BCM" on CONSULT.
- Perform "LIGHT WARN ALM" of "ACTIVE TEST".
Does meter buzzer beep?
YES
INSPECTION END
NO
GO TO STEP 2 .
- CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.
BUZZER Under the condition of buzzer input : On Except above : Off Is the inspection result normal?
YES
Replace combination meter.
NO
Replace BCM. Refer to REMOVAL AND INSTALLATION .