Back-Up Collision Intervention System Operation Description
WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
- ADAS control unit enables Back-up Collision Intervention system.
- The BCI system is automatically turned ON every time the engine is started.
- Combination meter turns Back-up Collision Intervention ON indicator ON/OFF according to the signals from ADAS control unit via CAN communication.
- Side radar detects a vehicle approaching, and transmits the vehicle detection signal to ADAS control unit via ITS communication.
- Side radar receives vehicle speed signal from ADAS control unit and changes its detecting function.
- ADAS control unit starts the control as follows, based on a vehicle detection signal.
OPERATION CONDITION OF BACK-UP COLLISION INTERVENTION SYSTEM
ADAS control unit performs the control when the following conditions are satisfied.
- Back-up Collision Intervention: ON (Selected by BCI switch)
- When the vehicle is moving in reverse at 8 km/h (5 MPH) or less.
NOTE:
When the Back-up Collision Intervention system setting is ON in the BCI switch.