Additional Service When Replacing Control Unit: Description
WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
Each function is reset to the following condition when the driver seat control unit is replaced. Refer to SPECIAL REPAIR REQUIREMENT .
| Function | Condition | Procedure |
|---|---|---|
| Memory (Seat, steering, mirror) | Erased | Perform storing |
| Entry/exit assist | ON | Perform initialization |
| Set slide amount* | ||
| Intelligent Key interlock | Erased | Perform storing |
| Seat synchronization | OFF | - |
* : Default value is 40mm.