Work Procedure

CHOOSE METHOD
There are two ways of setting method.

Which method do you choose?

With CONSULT

GO TO 2.

With set switch

GO TO 3.
WITH CONSULT
1. Select "Work support".
2. Select "EXIT SEAT SLIDE SETTING", or "EXIT TILT SETTING" then touch display to change between ON and OFF.
  - EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
  - EXIT TILT SETTING: Entry/exit assist (steering column)
3. Select "SEAT SLIDE VOLUME SET" and touch either of "40 mm", "80 mm", or "150 mm".
4. Then touch "OK".
GO TO 4.
WITH SET SWITCH
1. Turn ignition switch OFF.
2. Push setting button and hold for more than 10 seconds.
GO TO 4.
CONFIRM THE OPERATION
Check the entry/exit assist function setting is changed.

Is the setting changed?

YES

END

NO

GO TO 1.