FixVault
Home › Infiniti › 2018 › QX30 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (DTC/Circuit Diagnosis) (3 Of 4) › DTC/Circuit Diagnosis › DTC P0607: Control Module › Diagnosis Procedure

Diagnosis Procedure

  1. ERASE DTC 

    SYMBOL With CONSULT

    1. Erase the DTC.
    2. Turn ignition switch OFF.
    3. Start the engine.
    4. Check DTC.

    Is the DTC detected again?

    YES

    Replace ECM. Refer to Removal and Installation .

    NO

    INSPECTION END

About FixVault