Configuration (AFS Control Unit): Description

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle specification needs to be written with CONSULT because it is not written after replacing AFS control unit. (For details, refer to Work Procedure .)

Configuration has three functions as follows.

Function	Description
READ CONFIGURATION	Reads the vehicle configuration of current AFS control unit. Saves the read vehicle configuration.
WRITE CONFIGURATION - Manual selection	Writes the vehicle configuration with manual selection.
WRITE CONFIGURATION - Config file	Writes the vehicle configuration with saved data.

CAUTION: When replacing AFS control unit, always perform "WRITE CONFIGURATION" with CONSULT. Or not doing so, AFS control unit control function does not operate normally.

Complete the procedure of "WRITE CONFIGURATION" in order.
Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
If you set incorrect "WRITE CONFIGURATION", incidents might occur.