Work Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

WRITING MODE SELECTION
CONSULT Configuration
1. Turn ignition switch ON.
2. Select "Configuration" mode of "HIGH BEAM ASSIST" using CONSULT.
When writing saved data

GO TO 2.

When writing manually

GO TO 3.
PERFORM "WRITE CONFIGURATION - CONFIG FILE"
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file".

WORK END
PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"
CONSULT Configuration
1. Select "WRITE CONFIGURATION - Manual selection".
2. Select "SETTING".
3. When "COMMAND FINISHED", touch "End".
WORK END