Data Monitor
|
Monitor item [Value/Unit] |
Description |
|
STR ANGLE SIG* 1 [ deg.] |
The steering angle value judged by the steering angle sensor signal received from the steering angle sensor via CAN communication |
|
VHCL SPD [km/h] |
The vehicle speed signal value from the combination meter via CAN communication |
|
SLCT LVR POSI [P/R/N/D/M] |
The selector lever status judged by the shift position signal received from TCM via CAN communication |
|
HEAD LAMP [On/Off] |
The headlamp ON/OFF status judged by the low beam status signal received from IPDM E/R via CAN communication |
|
AFS SW [On/Off] |
NOTE:
This item is displayed, but cannot be monitored
|
|
REVERSE SW [On/Off] |
NOTE:
This item is displayed, but cannot be monitored
|
|
HI SEN OTP RR [V] |
The height sensor signal voltage value input from the height sensor |
|
HI SEN OTP FR [V] |
NOTE:
This item is displayed, but cannot be monitored
|
|
LEV ACTR VLTG [%] |
The ratio value to the battery voltage generated by the aiming motor signal control value judged by AFS control unit |
|
SWVL SEN LH [ deg.] |
The headlamp swivel angle value judged by AFS control unit according to the swivel position sensor signal received from the swivel actuator via LIN communication |
|
SWVL SEN RH [ deg.] |
|
|
SWVL ANGLE LH [ deg.] |
The swivel angle command value to the swivel motor judged by AFS control unit |
|
SWVL ANGLE RH [ deg.] |
|
|
HI SEN INI RR [V] |
Height sensor signal voltage value at height sensor initialization |
|
HI SEN INI FR [V] |
NOTE:
This item is displayed, but cannot be monitored
|
|
PINION ANGLE* 2 [ deg.] |
The steering pinion angle value judged by the steering pinion angle signal received from the steering force control module via CAN communication |
* 1 : For models with direct adaptive steering, this item is displayed, but cannot be monitored.
* 2 : For models without direct adaptive steering, this item is displayed, but cannot be monitored.