System Description: Outline
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- Auto light system is controlled by each function of BCM and IPDM E/R.
Control by BCM
- Combination switch reading function
- Auto light function
- Wiper linked auto lighting function
- Front fog override function (factory setting is OFF)
- Delay timer function
Control by IPDM E/R
- Relay control function
- FET control function
- Auto light system has the auto light function (with twilight lighting function), wiper linked auto lighting function.
- Auto light function automatically turns ON/OFF the exterior lamps*, depending on the outside brightness.
- Wiper linked auto lighting function automatically turns ON/OFF the exterior lamps* when the lighting switch is in the AUTO position, according to a front wiper operation.
- When auto light system turns the exterior lamps ON with the ignition switch OFF, delay timer function turns the exterior lamps* OFF, depending on the vehicle condition with the auto light function after a certain period of time.
*: Headlamp (LO/HI), front fog lamp, parking lamp, license plate lamp, side marker lamp and tail lamp.
NOTE:
- Headlamp (HI) depend on the combination switch condition and the illumination judgment of high beam assist system. For details, refer to System Description .
- Front fog lamp depend on the combination switch condition.
- The settings of the twilight lighting function and the wiper linked auto lighting function can be changed with CONSULT. Refer to CONSULT Function (BCM - HEAD LAMP) .