FixVault
Home › Infiniti › 2018 › QX30 Base › Repair and Diagnosis › External Pages › Different car › Section 29 (Around View Monitor System) › Around View Monitor System › DTC/Circuit Diagnosis › U111C Front Camera Image Signal Circuit › DTC Description › DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait at least 30 seconds.
    3. Turn ignition switch ON and wait at least 30 seconds or more.
    4. Select "Self Diagnostic Result" mode of "AVM" using CONSULT.
    5. Check DTC.

    Is DTC U111C detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Intermittent Incident

    NO

    Confirmation after repair: INSPECTION END

About FixVault