FixVault
Home › Infiniti › 2018 › QX30 Pure › Repair and Diagnosis › External Pages › Different car › Section 29 (Around View Monitor System) › Around View Monitor System › DTC/Circuit Diagnosis › Camera Switch Signal Circuit › Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAMERA SWITCH SIGNAL 

    SYMBOL With CONSULT

    1. Turn ignition ON.
    2. Select "CAMERA SWITCH SIGNAL" in "DATA MONITOR" mode of "AVM" using CONSULT.
    3. Check "CAMERA SWITCH SIGNAL" indication as per the following condition.

      Monitor item

      Condition

      Indication

      CAMERA SWITCH SIGNAL

      Camera switch

      Press

      On

      Except above

      Off

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to Diagnosis Procedure .

About FixVault