FixVault
Home › Infiniti › 2018 › QX60 AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › Removal And Installation › Push-Button Ignition Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the instrument lower panel LH. Refer to Removal and Installation .
  2. Release the pawl (SYMBOL ) on each side of NATS antenna amp (1) and remove from the instrument pad (LH) (2).
    GNSDB120628Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release the pawl on each side and remove the push-button ignition switch from the NATS antenna amp.
About FixVault