FixVault
Home › Infiniti › 2018 › QX60 FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Drive Mode System › Removal And Installation › Drive Mode Select Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the shift selector handle. Refer to EXPLODED VIEW .
  2. Remove the center console upper side finisher LH and RH. Refer to Exploded View .
  3. Remove the shift selector finisher. Refer to Exploded View .
  4. Lift the shift selector finisher and disconnect the harness connectors.
  5. Remove the shift selector finisher from vehicle.
    GNSDB117133Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove the drive mode select switch (2) from the shift selector finisher (1) by prying the locking tabs, and push the switch through the top-side.
About FixVault