Exploded View

WARNING: This page is about a different variant/trim than selected.

Fig 1: Transfer Cover With Torque Specifications

Courtesy of NISSAN NORTH AMERICA, INC.

1.	Oil seal	2.	Transfer cover	3.	Filler plug
4.	Gasket	5.	Drain plug	6.	Oil seal
7.	O-ring	8.	Ring gear bearing adjusting shim (transfer cover side)	9.	Ring gear bearing (transfer cover side)
10.	Drive shaft oil seal	11.	Ring gear shaft	12.	Ring gear bearing (transfer case side)
13.	Ring gear bearing adjusting shim (transfer case side)	14.	Ring gear	15.	Baffle plate
16.	Transfer case	17.	Plug	18.	O-ring
19.	Oil seal	20.	Dowel pin	21.	Drive pinion
22.	Drive pinion adjusting shim	23.	O-ring	24.	Pinion bearing assembly
25.	Oil seal	26.	Dust cover	27.	Companion flange
28.	Pinion lock nut
A.	Oil seal lip	B.	Comply with the assembly procedure when tightening. Refer to Assembly .
: N.m (kg-m, ft-lb)
: N.m (kg-m, in-lb)
: Always replace after every disassembly.
: Apply gear oil.
^* : Apply anti-corrosive oil.
: Apply multi-purpose grease.
: Select with proper thickness.