Work Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
- Always perform the radar alignment after removing and installing or replacing the distance sensor.CAUTION: The system does not operate normally unless the radar alignment is performed. Always perform it.
- Perform the ICC system action test to check that the ICC system operates normally.
- PERFORM RADAR ALIGNMENT
Perform the radar alignment. Refer to Work Procedure .
GO TO 2.
- CHECK FEB SYSTEM SETTING
- Start the engine.
- Check that the FEB system setting can be enabled/disabled on the combination meter.
INSPECTION END