FixVault
Home › Infiniti › 2019 › QX30 Pure › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Unit Disassembly And Assembly › Input Shaft › Disassembly and Assembly › Disassembly

Disassembly and Assembly: Disassembly

  1. Remove needle bearings.
  2. Remove 5th and 7th gear from drive shaft.
  3. Using suitable tool remove the sensor rotor from drive shaft.
  4. Using sleeve [SST: KV325H0700 (TechMate No. -) (DAIMLER tool No. 168 589 01 14 00)] remove the 3rd gear from drive shaft.
About FixVault