Component Inspection

1. Turn ignition switch OFF.
2. Disconnect engine coolant temperature sensor1 harness connector.
3. Remove engine coolant temperature sensor1.
4. Check resistance between engine coolant temperature sensor1 terminals by heating with hot water as shown in the figure.

   Courtesy of NISSAN NORTH AMERICA, INC.

   Engine coolant temperature sensor1		Condition		Resistance (kOhm)
   +	-
   Terminal
   1	2	Temperature [ deg.C (deg.F)]	20 (68)	2.37 - 2.63
   			50 (122)	0.68 - 1.00
   			90 (194)	0.236 - 0.260

Is the inspection result normal?

YES

INSPECTION END

NO

Replace engine coolant temperature sensor 1. Refer to Exploded View .