FixVault
Home › Infiniti › 2021 › Q50 Pure, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Drive Mode System (Diagnostics) › Description › System › Log-In Function › System Description › Input Signal And Output Signal

Input Signal And Output Signal

Major signal transmission between each unit via communication lines is shown in the following table.

Component

Signal description

Chassis control module
  • The chassis control module transmits a key link signal and a log-in permit signal to the following units:
    • Combination meter
    • AV control unit
    • A/C auto amp.
    • Driver seat control unit
    • ADAS control unit
    • BCM
  • The chassis control module receives a key ID signal from BCM.
  • The chassis control module receives a user information signal from AV control unit.

BCM
  • The BCM transmits a key ID signal to the following units:
    • Combination meter
    • AV control unit
    • A/C auto amp.
    • Chassis control unit
    • Driver seat control unit
    • ADAS control unit
  • The BCM receives a key link signal and a log-in permit signal from chassis control module.
  • The BCM receives a user information signal from AV control unit.

AV control unit
  • The AV control unit transmits a user information signal to the following units:
    • Combination meter
    • A/C auto amp.
    • Driver seat control unit
    • ADAS control unit
    • Chassis control unit
    • BCM
  • The AV control unit receives a key link signal and a log-in permit signal from chassis control module.
  • The AV control unit receives a key ID signal from BCM.

Driver seat control unit
  • The driver seat control unit receives a key link signal and a log-in permit signal from chassis control module.
  • The driver seat control unit receives a user information signal from AV control unit.
  • The driver seat control unit receives a key ID signal from BCM.

Combination meter
  • The combination meter receives a key link signal and a log-in permit signal from chassis control module.
  • The combination meter receives a key ID signal from BCM.
  • The combination meter receives a user information signal from AV control unit.

A/C auto amp.
  • The A/C auto amp. receives a key link signal and a log-in permit signal from chassis control module.
  • The A/C auto amp. receives a key ID signal from BCM.
  • The A/C auto amp. receives a user information signal from AV control unit.

ADAS control unit
  • The ADAS control unit receives a user information signal from AV control unit.
  • The ADAS control unit receives a key ID signal from BCM.
About FixVault