FixVault
Home › Infiniti › 2021 › Q60 Pure, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (DTCS) (6 Of 7) › Engine (ECM) › DTC P2127: App Sensor › DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. CHECK APP SENSOR 2 POWER SUPPLY 
    1. Disconnect accelerator pedal position (APP) sensor harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between APP sensor harness connector and ground.

      +

      -

      Voltage

      (Approx.)

      APP sensor

      Connector

      Terminal

      M124 *1

      10 *1

      Ground

      5 V

      M126 *2

      6 *2

      *1: With FEB

      *2: Without FEB

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    GO TO 2.

  2. CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT FOR OPEN AND SHORT 
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between APP sensor harness connector and ECM harness connector.

      APP sensor

      ECM

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M124 *1

      10 *1

      E152

      194

      Existed

      M126 *2

      6 *2

      *1: With FEB

      *2: Without FEB

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair or replace error-detected parts.

  3. CHECK SENSOR POWER SUPPLY 2 CIRCUIT 

    Refer to Diagnosis Procedure .

    Is the inspection result normal?

    YES

    Perform the trouble diagnosis for ECM power supply circuit. Refer to Diagnosis Procedure .

    NO

    Repair or replace error-detected parts.

  4. CHECK APP SENSOR 2 GROUND CIRCUIT FOR OPEN AND SHORT 
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between APP sensor harness connector and ECM harness connector.

      APP sensor

      ECM

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M124 *1

      11 *1

      E152

      196

      Existed

      M126 *2

      2 *2

      *1: With FEB

      *2: Without FEB

    4. Also check harness for short to power and short to ground.

    Is the inspection result normal?

    YES

    GO TO 5.

    NO

    Repair or replace error-detected parts.

  5. CHECK APP SENSOR 2 INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT 
    1. Check the continuity between APP sensor harness connector and ECM harness connector.

      APP sensor

      ECM

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M124 *1

      12 *1

      E152

      195

      Existed

      M126 *2

      1 *2

      *1: With FEB

      *2: Without FEB

    2. Also check harness for short to power and short to ground.

    Is the inspection result normal?

    YES

    GO TO 6.

    NO

    Repair or replace error-detected parts.

  6. CHECK APP SENSOR 

    Refer to Component Inspection .

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace accelerator pedal assembly. Refer to ACCELERATOR CONTROL SYSTEM : Removal & Installation .(Models without distance control assist system) or refer to ACCELERATOR CONTROL SYSTEM : Removal & Installation .(Models with distance control assist system).

About FixVault