DTC Confirmation Procedure

If "DTC Confirmation Procedure" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.

With CONSULT

1. Turn the ignition switch OFF to ON.
   CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform self-diagnosis for "CHASSIS CONTROL".

Is DTC "C1BBB-49" detected?

YES

Refer to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: INSPECTION END