Component Inspection

1. Turn ignition switch OFF.
2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.

   Fuel pump		Condition		Resistance
   Terminal
   5	6	Temperature [Deg. C (Deg. F)]	25 (77)	0.2 - 5.0 Ohm

Is the inspection result normal?

YES

INSPECTION END

NO

Replace fuel filter and fuel pump assembly. Refer to FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation .