Distance Sensor Alignment: Preparation

WARNING: This page is about a different car, the 2021 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

ADVANCE PREPARATION FOR RADAR ALIGNMENT PROCEDURE

Adjust all tire pressures to the specified value.
Empty the vehicle. (Remove any luggage from the passenger compartment, luggage room, etc.)
Shift the selector lever to "P" position, and release the parking brake.
Fully fill the fuel tank, and then check that the coolant and oils are filled up to correct level.

Clean the distance sensor area

of the grille.

Courtesy of NISSAN NORTH AMERICA, INC.

Refer to Vehicle Set Up .