Consult Functions

CONSULT performs the following functions via the communication with the around view monitor control unit.

Diagnosis mode	CGW Status			Description
Diagnosis mode	Restricted Mode	Diag Test Mode	Open Mode	Description
Self Diagnostic Result	Display	Display	Display	Around view monitor control unit and AV communication circuit connection diagnosis is performed. Current and previous malfunctions are displayed collectively.
CGW Information	Display	Display	Display	Display the current CGW mode Enables CGW to switch mode
Data Monitor	Display	Display	Display	Diagnosis of vehicle signal that is received by around view monitor control unit can be performed.
Work support	Non-display	Non-display	Display	Display of predicted course line can be switched to ON/OFF. Correction of turning radius display can be performed. MOD function can be switched to ON/OFF. Calibration and initialization of each camera can be performed. Fine tuning of Birds-Eye view can be performed. MAC KEY can be writing.
ECU Identification	Display	Display	Display	Around view monitor control unit part number, software version, and hardware version can be identified.
Configuration ^*	Display	Display	Display	Writes the vehicle specification when replacing around view monitor control unit.
MAC Diagnosis ^*	Display	Display	Display	Display MAC diagnosis result divided into the following two inspection priorities. Inspection Priority 1: Root cause Inspection Priority 2

*: Displays when performing "Diagnosis (All System)".