DTC Confirmation Procedure

TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON.

GO TO 2.

1. Turn ignition switch ON and wait at least 10 second.
2. Turn ignition switch OFF and wait at least 10 seconds.
3. Repeat step 1 and 2 for 2 times.
4. Turn ignition switch ON.
5. Check the DTC.

Is the DTC detected?

YES

Proceed to DTC Diagnosis Procedure .

NO-1

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO-2

Confirmation after repair: INSPECTION END