FixVault
Home › Infiniti › 2022 › QX60 Pure, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (3 Of 3) › Removal And Installation › Fuel Pump Control Module (FPCM) › Removal and Installation › Removal

Removal and Installation: Removal

  1. Disconnect the battery negative terminal. Refer to Removal and Installation .
  2. Remove luggage side lower finisher (LH). Refer to Removal and Installation .
  3. Disconnect harness connector from fuel pump control module.
  4. Remove nut and bolt from bracket and remove fuel pump control module assembly.
  5. If necessary, remove bolts from fuel pump control module and remove fuel pump control module bracket.
About FixVault