Confirmation Procedure

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: Before performing the following procedure, confirm that battery voltage is 12 V or more with ignition switch ON.

>>

GO TO 2.

1. Turn ignition switch ON and wait at least 10 seconds.
2. Check 1st trip DTC.

Is DTC P11A0 detected?

>>

Proceed to Diagnosis Procedure .

>>

To check malfunction symptom before repair: Refer to Intermittent Incident .

>>

Confirmation after repair: INSPECTION END