Work Procedure

CHECK TYPE ID
1. 1. Use FAST (service parts catalog) to search IPDM E/R of the applicable vehicle and find "Type ID".
  2. Write down "Type ID".
>>

GO TO 2.
WRITE CONFIGURATION
1. CONSULT
  1. Select "After ECU Replacement", then "Manual Selection".
  2. Select the "Type ID" found using FAST (service parts catalog) to write the "Type ID" into the IPDM E/R.
>>

GO TO 3.
OPERATION CHECK
1. Confirm that each function controlled by IPDM E/R operates normally.
>>

Work End.