CONSULT Function
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF -> ON (for at least 5 seconds) -> OFF. If this step is not performed, the BCM may not go to "sleep mode", potentially causing a discharged battery and a no-start condition.
APPLICATION ITEM
CONSULT can display each diagnostic item using the diagnostic test modes shown following.
| Diagnosis mode | Description |
|---|---|
| Self Diagnostic Results | Displays pre-crash seat belt control unit self-diagnosis results. |
| Data Monitor | Displays pre-crash seat belt control unit input/output data in real time. |
| Work support | Pre-crash seat belt control unit can change system settings based on driver requirements. |
| ECU Identification | Displays pre-crash seat belt control unit part number. |
SELF DIAGNOSTIC PROCEDURE
CONSULT can be used to read and clear DTCs.
ECU IDENTIFICATION
Displays the part number of the pre-crash seat belt control unit.
SELF DIAGNOSTIC RESULTS
Pre-Crash Seat Belt Control Unit LH: DTC Index .Pre-Crash Seat Belt Control Unit RH: DTC Index .
DATA MONITOR
| CONSULT | Display | Description |
|---|---|---|
| BUCKLE SW RH | On | Seat belt buckle switch RH is ON. |
| Off | Seat belt buckle switch RH is OFF. | |
| BUCKLE SW LH | On | Seat belt buckle switch LH is ON. |
| Off | Seat belt buckle switch LH is OFF. | |
| VEHICLE DISTANCE | On | Forward emergency braking signal ON. |
| Off | Forward emergency braking signal OFF. | |
| IGN SW | On | Ignition switch ON. |
| Off | Ignition switch OFF. | |
| FR DOOR SW RH | Open | Front door switch (RH) closed. |
| Close | Front door switch (RH) open. | |
| FR DOOR SW LH | Open | Front door switch (LH) closed. |
| Close | Front door switch (LH) open. | |
| ABS ACTIVATING | On | ABS activation signal ON. |
| Off | ABS activation signal OFF. | |
| VHCL SPEED | [km/h] | Indicates vehicle speed. |
| BRK PEDAL SNSR1 | [V] | Brake pedal stroke sensor 1 signal. |
| BRK PEDAL SNSR2 | [V] | Brake pedal stroke sensor 2 signal. |
| STRG ANGLE | [deg] | Steering angle signal. |
| STRG ACCL SPEED | [deg/s] | Steering angle speed signal. |
| INCLINATION JDMT | On | Pre roll over signal ON. |
| Off | Pre roll over signal OFF. | |
| PRE-TEN ACTIVTN | On | Pre-tensioner operation signal ON. |
| Off | Pre-tensioner operation signal OFF. | |
| HEAT PROTC RH | On | Heat protection (RH) ON. |
| Off | Heat protection (RH) OFF. | |
| HEAT PROTC LH | On | Heat protection (LH) ON. |
| Off | Heat protection (LH) OFF. | |
| FCW | On | Indicates ON state of the FCW system. |
| Off | Indicates OFF state of the FCW system. |
WORK SUPPORT
| Work support item | Display | Function |
|---|---|---|
| DOOR OPENING RETRACT RETRY | UP | Sets the seat belt retractor counter to a higher trigger. |
| STANDARD | Default seat belt retractor counter trigger. | |
| DOWN | Sets the seat belt retractor counter to a lower trigger. |