| Screen is not switched to camera image, when camera switch is pressed and when shift position is shifted to the reverse position. |
"AVM" is not displayed on the system selection screen of CONSULT. |
Around view monitor control unit power supply circuit |
Check that the following "DATA MONITOR" items operate normally using CONSULT
- "CAMERA SWITCH SIGNAL"
- "REVERSE SIGNAL"
|
"CAMERA SWITCH SIGNAL" and "REVERSE SIGNAL" are normal |
Around view monitor control unit |
| "CAMERA SWITCH SIGNAL" or "REVERSE SIGNAL" is not normal |
CAN communication |
| Screen is switched when pressing camera switch or shifting selector lever to the reverse position, however, all views are not displayed. |
Only superimposing is displayed (only images that AV control unit plots are displayed). |
LVDS (between around view monitor control unit and each camera) |
| Superimposing is not displayed. |
AV control unit or LVDS (between around view monitor control unit and AV control unit) |
| The screen is not switched to the rear view image even if the selector is shifted to the reverse position. |
The front view is displayed normally. |
CAN communication (Reverse signal) |
- Front view screen is not displayed.
- Front of top view screen is displayed.
|
Check the following "DATA MONITOR" items using CONSULT.
- "F-CAMERA IMAGE SIGNAL"
- "F-CAMERA COMM STATUS"
- "F-CAMERA COMM LINE"
|
NG |
LVDS (between front camera and around view monitor control unit) |
| OK |
Front camera |
- The rear view screen is not displayed.
- Rear of top view screen is not displayed.
|
Check the following "DATA MONITOR" items using CONSULT.
- "REAR CAMERA IMAGE SIGNAL"
- "R-CAMERA COMM STATUS"
- "R-CAMERA COMM LINE"
|
NG |
LVDS (between rear camera and around view monitor control unit) |
| OK |
Rear camera |
- The side view screen is not displayed.
- Left side of top view screen is not displayed.
|
Check the following "DATA MONITOR" items using CONSULT.
- "Left camera image signal"
- "Left camera comm status"
- "Left camera line"
|
NG |
LVDS (between side camera LH and around view monitor control unit) |
| OK |
Side camera LH |
| Right side of top view image is not displayed. |
Check the following "DATA MONITOR" items using CONSULT.
- "Right camera image signal"
- "Right camera comm status"
- "Right camera line"
|
NG |
LVDS (between side camera RH and around view monitor control unit) |
| OK |
Side camera RH |