FixVault

Component Function Check

  1. CHECK OVERALL FUNCTION-I 

    SYMBOL With CONSULT

    1. Start engine and warm it up to the normal operating temperature.
    2. Perform "VIAS S/V-1" in "Active Test" mode of "ENGINE" with CONSULT.
    3. Turn VIAS control solenoid valve 1 "ON" and "OFF", and check that power valve actuator 1 rod moves.
      GNSDB125250Courtesy of NISSAN NORTH AMERICA, INC.
      SYMBOL Power valve actuator 1 SYMBOL Power valve actuator 1 rod SYMBOL Power valve actuator 2
      SYMBOL Power valve actuator 2 rod
      SYMBOL : Vehicle front

    SYMBOL Without CONSULT

    1. Start engine and warm it up to the normal operating temperature.
    2. Rev engine quickly up to approximately 5, 000 RPM.
    3. Check that power valve actuator 1 rod moves.
      GNSDB124690Courtesy of NISSAN NORTH AMERICA, INC.
      SYMBOL Power valve actuator 1 SYMBOL Power valve actuator 1 rod SYMBOL Power valve actuator 2
      SYMBOL Power valve actuator 2 rod
      SYMBOL : Vehicle front

    Is the inspection result normal?

    YES>>

    GO TO 2.

    NO>>

    Diagnosis Procedure .

  2. CHECK OVERALL FUNCTION-II 

    SYMBOL With CONSULT

    1. Perform "VIAS S/V-2" in "Active Test" mode of "ENGINE" with CONSULT.
    2. Turn VIAS control solenoid valve 2 "ON" and "OFF", and check that power valve actuator 2 rod moves.
      GNSDB125250Courtesy of NISSAN NORTH AMERICA, INC.
      SYMBOL Power valve actuator 1 SYMBOL Power valve actuator 1 rod SYMBOL Power valve actuator 2
      SYMBOL Power valve actuator 2 rod
      SYMBOL : Vehicle front

    SYMBOL Without CONSULT

    1. When revving engine up to 5, 000 RPM quickly.
    2. Rev engine quickly up to approximately 5, 000 RPM.
    3. Check that power valve actuator 2 rod moves.
      GNSDB124690Courtesy of NISSAN NORTH AMERICA, INC.
      SYMBOL Power valve actuator 1 SYMBOL Power valve actuator 1 rod SYMBOL Power valve actuator 2
      SYMBOL Power valve actuator 2 rod
      SYMBOL : Vehicle front

    Is the inspection result normal?

    YES>>

    INSPECTION END

    NO>>

    Diagnosis Procedure .