Component Inspection

1. Turn ignition switch OFF.
2. Disconnect electric throttle control actuator harness connector.
3. Check the resistance between electric throttle control actuator terminals as per the following.

   Terminals	Resistance
   5 and 6	Approx. 1 - 15 Ω [at 25°C (77°F)]

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

GO TO 2.

1. Replace electric throttle control actuator. Refer to INTAKE MANIFOLD : Removal and Installation .
2. Refer to Work Procedure .

>>

INSPECTION END