Work Procedure

Always perform the ADAS control unit configuration after replacing the ADAS control unit.

1. ADAS CONTROL UNIT CONFIGURATION (WITH FEB MODELS) 

   Perform the ADAS control unit configuration with CONSULT. Refer to Work Procedure .

   >>

   GO TO 2.

2. PERFORM SELF-DIAGNOSIS 

   Perform the self-diagnosis of ADAS control unit with CONSULT. Check if any DTC is detected.

   Is any DTC detected?

   YES>>

   Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .

   NO>>

   INSPECTION END