FixVault
Home › Isuzu › 1984 › Pickup LS, 2.2 S, 4WD › Repair and Diagnosis › Engine Performance › System › EGR Function Testing - Gasoline › Component Testing › Thermal Vacuum Valve

Thermal Vacuum Valve

  1. Remove thermal vacuum valve from engine and place sensing portion in water, 115-129°F (46-54°C) on I-Mark, P'UP and Trooper II models.
  2. Blow through hoses connected to valve. Air should pass, indicating valve is open. If not, replace valve.
About FixVault