FixVault
Home › Isuzu › 1989 › I-Mark LS › Repair and Diagnosis › Electrical › Charging Systems › Alternator - NIPPONDENSO › Bench Testing › Stator

Bench Testing: Stator

  1. Using an ohmmeter, check continuity between stator core leads. Ohmmeter should read approximately .1 ohms at 68°F (20°C). If no continuity between leads exists, replace stator.
  2. Connect ohmmeter between stator core and to each stator lead. If there is no continuity, stator is good. If continuity exists, stator is grounded and must be replaced.
About FixVault