Front Wiper Switch: Trooper
Disconnect wiper switch connector. With switch in the position indicated, check continuity between specified terminals using ohmmeter. See TROOPER FRONT WIPER SWITCH CONTINUITY table. See Fig 1 . Replace switch if continuity did not exist at specified terminals.
TROOPER FRONT WIPER SWITCH CONTINUITY
| Switch Position | (1) Terminal No. (Wire Colors) | ||
|---|---|---|---|
| OFF | 8 & 5 (Blue/Red & Blue White) | ||
| LOW | 5 & 9 (Blue/White & Black) | ||
| HIGH | 6 & 9 (Blue/Yellow & Black) | ||
| Washer ON | 9 & 7 (Black & Blue/Black) | ||
|
|||