FixVault
Home › Isuzu › 1992 › Impulse RS › Repair and Diagnosis › Steering › Steering Column › Removal & Installation › Steering Wheel › Installation

Steering Wheel: Installation

  1. Ensure front wheels are pointed straight-ahead. Ensure SIR coil harness is at 12 o'clock position and tape is unbroken. Route SIR coil harness and horn wiring through opening in steering wheel, ensuring harness will not be pinched. Remove tape from SIR coil and install steering wheel, aligning reference marks made during removal. Tighten steering wheel retaining nut to 25 ft. lbs. (34 N.m).
  2. To complete installation, reverse removal procedure. After all components are installed, activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
About FixVault