Power Steering Pump: Reassembly

To assemble, reverse disassembly procedure. Install rotor, cam ring and vane respectively. Ensure tiny square Black mark on rotor turns upward. Align cam ring holes with body slots and turn side of cam ring with clearance around dowel facing upward. Ensure rounded end of vane matches cam ring inner surface. Tighten end cover bolt and hose connector fitting to 29-36 ft. lbs. (39-49 N.m).

To reassemble, reverse disassembly procedure. Install new seals and housing "O" ring. Install pulley using proper puller/press equipment. Install mounting bolts and fitting. See TORQUE SPECIFICATIONS  table.