FixVault
Home › Isuzu › 1993 › Rodeo LS, RWD, Automatic › Repair and Diagnosis › Electrical › Charging Systems › Alternator & Regulator › Bench Testing › Stator

Bench Testing: Stator

  1. Using an ohmmeter, check continuity between stator leads. Ohmmeter should read approximately .07 ohm at 68°F (20°C). If continuity does not exist between leads, replace stator.
  2. Connect ohmmeter between stator core and each stator lead. If continuity does not exist, stator is good. If continuity exists, stator is grounded and must be replaced.
About FixVault