Clutch Assembly: Installation
- Lubricate ball stud and install release fork, if equipped. Lubricate shift collar. Assemble release bearing, shift collar, release fork, and retaining springs. Using clutch aligner, install clutch assembly into original position.
- Tighten bolts evenly in diagonal pattern to specification. See TORQUE SPECIFICATIONS . Lubricate input shaft splines and release bearing contact surfaces with molybdenum grease.
- Operate transmission jack to position transmission at same level as engine. Mate transmission to engine and install engine-to-transmission bolts. On 3.2L models, pull firmly on clutch release fork to engage release bearing to pressure plate. A click should be heard indicating release bearing is engaged. On all models, reverse removal procedure to complete installation. Adjust clutch pedal and replace fluids.