BRAKELIGHT Switch
- Unplug 4-pin connector from brakelight switch. Using a DVOM, check for continuity between brakelight switch terminals No. 1 and 4. SeeFig 1
. Continuity should exist. Check for continuity between brakelight switch terminals No. 2 and 3. Continuity should not exist.
- Depress brake pedal and hold. Check for continuity between brakelight switch terminals No. 1 and 4. Continuity should not exist. Check for continuity between brakelight switch terminals No. 2 and 3. Continuity should exist. If continuity is not as specified, check brake pedal height. See BRAKE PEDAL HEIGHT
under ADJUSTMENTS. If brake pedal height is okay, replace brakelight switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.