FixVault
Home › Isuzu › 1996 › Oasis LS › Repair and Diagnosis › Electrical › Starter › Bench Testing › Solenoid Tests › Solenoid Return Test

Solenoid Return Test

  1. Connect negative battery lead to terminal "S" and ground. See Fig 1 . Connect battery positive lead to terminal "M". Pinion should extend.
  2. Disconnect lead at terminal "S". Pinion should immediately return to stationary position. If pinion does not return to stationary position, replace solenoid.
Fig 1: Testing Solenoid Coil
G90F00989Courtesy of ISUZU MOTOR CO.
About FixVault