FixVault
Home › Isuzu › 1996 › Trooper SE › Repair and Diagnosis › External Pages › Different car › Section 1 (Servicing - A/T) › Adjustments › Shift Control Cable

Shift Control Cable

WARNING: This page is about a different car, the 1996 Acura SLX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen transmission control rod lock nut at end of selector lever. Ensure transmission control lever is in Neutral. Select "N" position with gear selector lever. See Fig 1
  2. Push gear selector lever forward so it is against the forward edge of the neutral detent. Hold gear selector lever in this position. Tighten control rod and ensure selector operates smoothly through all indicated positions. Readjust if necessary.
Fig 1: Indexing "N" Selector Position
G96E19103Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault